Packaging tape dispensers are ideal for sealing boxes, cartons, and can do all heavy packaging work. Rapesco's 960 dispenser is also fast and easy to load.

step 1

Insert the roll of packaging tape onto the large dispenser wheel in the upper right corner of the tape dispenser with the handle to the right.

Adjust the position of the roll of tape so that when the dispenser is pulled back, its adhesive side is unfolded.

Step 2

Pull the front end of the tape roll through the slot between the dispenser roller and the metal guide.

Press the extended metal tab to keep the guide open. The adhesive side of the tape should face down / away from the edge of the blade. If the tape is used , the tape will stick to the dispenser roller, so make sure the sticky side is facing down.

Step 3

Pull up the tape so that it covers the cutting rod / serrated blade, taking care not to cut yourself on the sharp blade.

To test the dispenser, pull out a small amount of tape and cut it with a serrated blade. Or press it against the box and pull it back to make sure the tape is loose and adhered.

Step 4

Adjust the tension on the distributor (in the center of the large distributor wheel) to set up a smooth and comfortable unwinding mechanism.

Note: The cutter is sharp, please use it and pay attention when loading and adjusting the tension.

Your tape dispenser is now ready for use.